S15
Place of installation, supply
S17
Meter type: Heat meters or combined
heat/cooling meters
S18
Meter type: Cooling meter
S21
Current flow rate
S22
Error message
S23
Power supply: Mains
S24-S26
Power supply: Battery with capacity
indicator
S27
Module identifier
S28
Current loop display (LOOP)
S29-S32
Tariff display
13-15
Current display code (LCD-ID)
3.3 Display current meter reading
The meter displays the current meter reading in kWh, MWh, MJ
or GJ.
Note
To avoid reading errors, the decimal places of displayed
values are marked by a frame.
Note
The calibrated value is indicated by an additionally
displayed star symbol (S12).
Note
Depending on the device parameterisation, both the
display scope and the displayed data may deviate from this
description.
3.3.1 Display values
The meter displays are arranged in multiple loops (LOOPs). The
default state is LOOP 0.
Proceed as follows to switch between the LOOPs:
•
Press button 2 until the desired LOOP appears.
After the last loop LOOP LE, LOOP 0 is displayed again.
3.3.2 Advancing in a loop
To advance to the next display value within a loop, proceed as
follows:
•
Press button 1.
After the last display value, the first display value appears again.
3.3.3 Loop "LOOP 0"
The meter is in loop "LOOP 0".
•
Press button 1 to advance to the next display value.
The LCD displays the following values one after the other:
Table 1: Loop "LOOP 0"
Loop head
Error message
(here: currently no
error)
Current energy
quantity (here:
kWh; heat meter;
installation location:
Return flow; tariff
on)
Current volume
Current value tariff
register 1 (only if
tariff was selected)
Current value tariff
register 2 (only if
tariff was selected)
Current value tariff
register 3 (only if
tariff was selected)
Segment test
Firmware version
CRC/CMAC
© Gyr
Subject to change without prior notice
07.02.2020
3
