Maintenance and Troubleshooting
50
5.3.
Self-Diagnostics
The bike is equipped with
on-board self-diagnostics.
If the bike experiences any
errors during operation, an
error message is displayed.
You can run self-
diagnostics to get further
information on the error by
pressing
ENTER
.
When you choose the option to enter diagnostics you will be
prompted with a warning screen. After reading it, take your feet
off the pedals and press
ENTER
.
The bike will systematically test individual components. During
some of the tests, you will be prompted with simple “Yes or No”
questions to assist with the diagnosis. Answer the questions
when prompted.
When the Self-Diagnostics has completed all of the tests, it will
read one of the two messages along the bottom: “No Errors
Detected”, or “Error Detected, Contact Service Provider”.
Contact your Dealer or go to www.landice.com and click on
Service Locator to find a provider in your area.
To manually enter self-diagnostics mode, press
3, 9
and
START
at the same time while the control panel is off, then
begin pedaling.
