manualshive.com logo in svg
background image

ZG SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

3

LANDA ZG  

•  

REV. 5/02

INTRODUCTION

Thank you for purchasing a Landa Pressure Washer.

This manual covers the operation and maintenance of
the ZG3-20321 and ZG3-20326 washers. All informa-
tion in this manual is based on the latest product infor-
mation available at the time of printing.

Landa, Inc. reserves the right to make changes at any
time without incurring any obligation.

The ZG Series was designed for maximum

use of 1 hour per day, 5 days per week.

Owner/User Responsibility:

The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this Landa pressure washer. Warning infor-
mation should be emphasized and understood. If the op-
erator is not fluent in English, the manufacturer’s instruc-
tions and warnings shall be read to and discussed with
the operator in the operator’s native language by the pur-
chaser/owner, making sure that the operator compre-
hends its contents.

Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.

This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.

When ordering parts, please specify model and
serial number.

IMPORTANT SAFETY
INFORMATION

WARNING: When using this machine basic precautions
should always be followed, including the following:

CAUTION: To reduce the risk of
injury, read operating instruc-
tions carefully before using.

1. Read the owner's manual thor-

oughly. Failure to follow instruc-
tions could cause malfunction
of the machine and result in
death, serious bodily injury and/
or property damage.

2. Know how to stop the machine and bleed pressures

quickly. Be thoroughly familiar with the controls.

3. Stay alert — watch what you are doing.

4. All installations must comply with local codes. Con-

tact your electrician, plumber, utility company or the
selling distributor for specific details.

WARNING: Risk of asphyxiation.
Use this product only in a well
ventilated area.

 5.

Avoid installing machines in

small areas or near exhaust
fans. Exhaust contains poison-
ous carbon monoxide gas; ex-
posure may cause loss of con-
sciousness and may lead to
death. It also contains chemi-

cals known, in certain quantities, to cause cancer,
birth defects, or other reproductive harm.

WARNING: Flammable liquids
can create fumes which can ig-
nite causing property damage or
severe injury.

WARNING: Risk of fire. Do not
add fuel when the product is op-
erating.

WARNING: Risk of explosion —
do not spray flammable liquids.

Allow engine to cool for 2 minutes before refueling. If any
fuel is spilled, make sure the area is dry before testing
the spark plug or starting the engine. (Fire and/or explo-
sion may occur if this is not done.)

Gasoline engines on mobile or portable equipment
shall be refueled:

(a) outdoors;

(b) with the engine on the equipment stopped;

(c) with no source of ignition within 10 feet of the

dispensing point; and

(d) with an allowance made for expansion of the fuel

should the equipment be exposed to a higher
ambient temperature.

In an overfilling situation, additional precautions are nec-
essary to ensure that the situation is handled in a safe
manner.

WARNING: High pressure stream
of fluid that this equipment can
produce can pierce skin and its
underlying tissues, leading to se-
rious injury and possible ampu-
tation.

6. Do not place machine near

flammable objects as the en-
gine is hot.

7. High pressure developed by these machines will

cause personal injury or equipment damage. Use
caution when operating. Do not direct discharge
stream at people, or severe injury or death will re-
sult.

WARNING

RISK OF

ASPHYXIATION.

USE  ONLY IN A WELL

VENTILATED AREA.

WARNING

RISK OF INJECTION
OR SEVERE INJURY
TO PERSONS. KEEP

CLEAR OF NOZZLE.

WARNING

RISK OF EXPLOSION:

DO NOT USE WITH

FLAMMABLE

LIQUIDS.

WARNING

READ OPERATOR’S

MANUAL THOROUGHLY

PRIOR TO  USE.

CAUTION

Содержание ZG3-20321























Отзывы: