Landa PGA3-27324, Руководство оператора

Страница: 16 / 22

PGA • 8.917-988.0 • Rev. 10/12
PRESSURE
W
ASHER
T
roub
leshooting Guide
16
PREVENTATIVE MAINTENANCE
This pressure washer was produced with the best available materials and quality craftsmanship. However, you
as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventa-
tive maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer
for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer.
Perform maintenance more often under severe conditions. Check pump oil and engine oil level before fi rst use
of your new pressure washer.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
SPRAY WAND
LEAKS Spray wand not properly attached Slide the spray wand into the gun. Turn the
wand collar clockwise onto the spray gun
threads until tight.
Broken o-ring Call local distributor and order an o-ring.
PUMP IS NOISY Pump is sucking air Check that hoses and fi ttings are air tight.
Turn off machine and purge pump by
squeezing trigger gun until a steady fl ow of
water emerges through nozzle.
MAINTENANCE SCHEDULE
Engine Oil
Inspect Daily
Change
First month or 20 hours.
Every 100 hours or every 6 months after fi rst month
Filter Every 50 hours
Air Cleaner/Filter
Inspect Daily
Clean Every 3 months or 50 hours
Engine Fuel Filter 500 hours or 6 months
Spark Plug
Maintenance
Inspect Every 6 months or 100 hours
Change Every year or 300 hours
Clean Fuel Tank(s) Annually
Pump Oil
Inspect Oil level daily
Change After fi rst 50 hours, then every 500 hours or annually (or 3 months)
Replace High Pressure Nozzle Every 6 months
Replace Quick Connects Annually
Clean Water Screen/Filter Weekly
Replace HP Hose Annually (if there are any signs of wear)
Belts*
Tighten Every 6 months
Inspect/Replace Every 6 months
*Note: When servicing belts, don't exceed 14 lb-ft on pump mounting screws.Failure to do so will cause
pump thread damage.