Landa ENG4-2000 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 102

Landa ENG4-2000 Скачать руководство пользователя страница 6

6

Safety

Important Safety Information

WARNING: If you do not follow these instructions
exactly, a fire or explosion may result, causing
property damage, personal injury or loss of life.

WARNING: To reduce the risk of
injury, read operating instructions
carefully before using.

1.

Read the owner's manual thor-
oughly. Failure to follow instruc-
tions and warnings could cause
malfunction of the machine and
result in death, serious bodily
injury and/or property damage.

2.

Know how to stop the machine and bleed pressure
quickly. Be thoroughly familiar with the controls.

3.

Stay alert — watch what you are doing.

4.

Use only your hand to push in or turn the gas
control knob. Never use a tool. If the knob will not
push in or turn by hand, don't try to repair it; call a
qualified service technician.

5.

All installations must comply with local codes.
Contact your electrician, plumber, utility company
or the selling dealer for specific details.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of electro-
cution. Check with a qualified electrician or service
personnel if you are in doubt as to whether the
outlet is properly grounded.

DANGER: Keep wand, hose, and
water spray away from electric
wiring or fatal electric shock may
result.

6.

To protect the operator from
electrical shock, the machine
must be electrically grounded. It
is the responsibility of the owner
to connect this machine to a
grounded receptacle of proper

voltage and amperage ratings. Do not spray water
on or near electrical components. Do not touch
machine with wet hands or while standing in water.
Always disconnect power before servicing.

WARNING: Flammable liquids can
create fumes which can ignite,
causing property damage or
severe injury.

WARNING: Risk of explosion —
Operate only where open flame or
torch is permitted. Do not spray
flammable liquids.

WARNING: Risk of fire — Do not
change LP tanks when the
product is operating or still hot.

WARNING: Use vapor fuel only.

7.

Gas appliances shall be
installed only in locations where
combustible dusts and
flammable gases or vapors are
not present. Do not store or use

flammable materials near this machine.

WARNING: In the event of a pilot outage, wait at
least five minutes to clear out any gas before
relighting.

8.

Keep operating area clear of all persons.

WARNING: High pressure spray
can cause paint chips or other
particles to become airborne and
fly at high speeds. To avoid
personal injury, eye, hand and
foot safety devices must be worn.

9.

Always wear properly rated eye
protection such as safety
goggles or face shield while
spraying.

(Safety glasses do not provide full protection)

Landa ENG Dealer’s Manual 9.801-510.0 - AV

DANGER

KEEP WATER

SPRAY AWAY FROM

ELECTRICAL WIRING.

WARNING

READ OPERATOR’S

MANUAL THOROUGHLY

PRIOR TO USE.

OPERATIONS

SAFET

Y

MAINTENANCE

WARNING

RISK OF EXPLOSION:

IF GAS SMELL

PRESENT TURN OFF

SUPPLY

WARNING

USE PROTECTIVE

EYE WEAR

AND CLOTHING

WHEN OPERATING

THIS EQUIPMENT.

WARNING

RISK OF FIRE.

DO NOT ADD FUEL

WHEN OPERATING

MACHINE.

«
...
4
5
6
7
8
...
»

Содержание ENG4-2000







































































































Отзывы:

Нет отзывов