Recommendations:
•
Before cleaning any surface, an inconspicuous
area should be cleaned to test spray pattern and
distance for maximum cleaning results.
•
If painted surfaces are peeling or chipping, use
extreme caution as pressure washer may remove
the loose paint from the surface.
•
Keep the spray nozzle a safe distance from the
surface you plan to clean. High pressure wash a
small area, then check the surface for damage. If
no damage is found, continue to pressure
washing.
CAUTION - Never use:
•
Bleach, chlorine products and other corrosive
chemicals
•
Liquids containing solvents (i.e., paint thinner,
gasoline, oils)
•
Tri-sodium phosphate products
•
Ammonia products
•
Acid-based products
These chemicals will harm the machine and will damage
the surface being cleaned.
ATTENTION: Ne jamais utiliser:
•
Eau de Javel, produits à base de chlore et autres
produits chimiques corrosifs
•
Liquides contenant des solvants (c.-à-d. diluant à
peinture, essence, huiles, etc.)
•
Produits à base de tripolyphosphate de sodium
•
Ammoniac ou produits à base d'acide
Ces produits chimiques endommageront la machine et
endommageront la surface étant nettoyée.
PRECAUCIÓN: Nunca utilice:
•
Blanqueadores, productos con cloro u otros
químicos corrosivos.
•
Solventes (por ejemplo: diluyente de pintura,
gasolina, aceites).
•
Productos de fosfato trisódico.
•
Productos de amoniaco.
•
Productos a base de ácido.
Estos químicos provocaran daño en la máquina y dañaran
la superficie que se está limpiando.
Rinsing
It will take a few seconds for the detergent to clear.
Apply safety latch to spray gun. Remove black soap
nozzle from the quick coupler. Select and install the
desired high pressure nozzle.
NOTE: You can also stop detergent from flowing by
simply removing detergent siphon tube from bottle.
Operations
14
Landa 2HOT Series Operator’s Manual -
9.808-353.0
- A