
9
Operations
Assembly Instructions
STEP 1:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
STEP 2:
Before installing nozzle,
turn on water supply and run
machine allowing water to flush
through the system until clear.
STEP 3:
Connect garden hose to
the cold water source.
STEP 5:
Insert nozzle into coupler.
Release the coupler collar and
push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Landa SEA Operator Manual 8.913-999.0 - AK
Safety
Latch
High Pressure
Hose
Spray
Gun
Outlet Fitting
Coupler Collar
Nozzle
Coupler
STEP 4:
Connect the high pressure hose to the outlet
discharge fitting. Push coupler collar forward until
secure. Connect the garden hose to pump water inlet.
Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage will result.
ATTENTION:
Ne pas faire fonctionner la pompe
sans eau pour éviter d'endommager la pompe.