Landa 1.103-825.0 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 38

Landa 1.103-825.0 Скачать руководство пользователя страница 15

15

Breakaway Switch &
D.O.T. Wet Cell Battery

After hitching to the tow vehicle, pull the safety pin on
the breakaway switch. Check to see if system is opera-
tional. Push safety pin back in to its original position.

Check battery fluid level every 60-90 days. Remove
cover. There are two fill caps. Refill with distilled water
only.

Breakaway Switch
Mounted on an A-Frame

Attach breakaway switch cable securely in a straight
line to the tow vehicle. Locate attachments so little
“slack” is left in the cable, but enough slack to allow for
turning without disengaging the pin. The cable will
activate brakes the instant a trailer becomes disen-
gaged. Brake adjustment is critical to stopping a disen-
gaged trailer.

Check Breakaway System
& Brakes Before Each Trip

1. Disconnect 12V plug from tow vehicle.

2. Pull breakaway pin.

3. While pin is pulled, move tow vehicle forward.

Brake should be on and wheels locked.

4. Replace pin and secure to tow vehicle. Do not loop

over hitch ball.

5. Plug 12V connector into tow vehicle receptacle.

6. Test brakes with brake controller.

NOTE: When disconnecting trailer from tow vehicle,
make sure to replace safety pin.

Landa ECOS 7000 Operator’s Manual 9.801-316.0 - G

«
...
13
14
15
16
17
...
»

Содержание 1.103-825.0







































Отзывы:

Нет отзывов