Land Pride WC1503 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 46

Land Pride WC1503 Скачать руководство пользователя страница 42

Section 6: Features & Benefits

Table of Contents

WC1503 Wood Chipper 328-085M

11/15/19

38

Section 6:

Features & Benefits

WC1503

Features

Benefits

Quick Hitch Adaptable

Quickly and easily attach chipper to tractor with one person.

1/4" Thick Cutting Knife

Rotor features 2 replaceable 1/4" hardened steel cutting edges.

Knives Can Be Rotated When
One Cutting Edge Is Worn

Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife
180

o

to a new cutting edge. Less downtime required to sharpen knives.

Knives Are Replaceable

Can replace knives when all cutting edges are worn out.

Two V-Belts

Designed to handle shock loads.

Spring Loaded Adjustable Idler

Allows for constant and proper tension on belt.

2-Bolt Flanged Bearings

Improves bearing life.

Cat. ll Shear-Bolt Driveline

Shear-bolt protects the unit when obstructions are encountered.

Skid Extension Supports

Allows the unit to sit on the ground while keeping the driveline near level. Extends life of
driveline u-joints.

Adjustable Rotating Discharge
Chute With Rotation Stops

Directs direction wood chips will be discharged. Chute rotate stops keep the chute from
discharging chips toward the operator feeding product toward the feed chute.

Adjustable Deflector Chute

Helps control the distance wood chips will be discharged away from the Wood Chipper.

9,090 FPM Knife Speed

For cleaner cut and better discharge of wood chips.

Self-Feeding System

Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be
retrieving the next object to load while the unit is chipping the last limb loaded into the feed
chute.

«
...
40
41
42
43
44
...
»

Содержание WC1503















































Отзывы:

Нет отзывов