Land Pride STH2024, Руководство оператора

Страница: 26 / 32

Section 4: Maintenance & Lubrication
Table of Contents
12/10/18 STH2024 Spike Tooth Harrow 322-315M
22
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
Clean, inspect, service and make necessary repairs to
the harrow when parking it for long periods and when
parking it at the end of a working season. This will help
ensure the harrow is ready for field use the next time you
hook-up to it.
WARNING
!
To avoid serious injury or death:
The harrow when not hooked to a tractor can fall backwards
unexpectedly causing bodily injury. Always store harrow with
wings folded and transport chains hooked.
1. Clean off any dirt and grease that may have
accumulated on the harrow and moving parts.
Scrape off compacted dirt and then wash surface
thoroughly with a garden hose.
2. Check teeth and locknuts to make sure they are not
missing, broken, or excessively worn. Replace
harrow teeth as needed. See “Spike Tooth
Replacement” on page 21.
3. Inspect for loose, damaged or worn parts and adjust
or replace as needed.
4. Replace all damaged or missing decals.
5. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts and gallon sizes by adding
TU, QT or GL to the end of the aerosol part number.
6. A coating of oil may also be applied to the teeth to
minimize oxidation.
7. Store harrow on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer harrow life.
8. Follow all unhooking instructions on page 19 when
disconnecting tractor from harrow.
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement is also available in
Orange.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN
82 . . . . . . . Orange 85 . . . . . . . Black
Lubrication Points
50
Hrs
Multi-purpose
spray lube Multi-purpose
grease lube Multi-purpose
oil lube Intervals in hours at which
lubrication is required
Lubrication
Legend
Axle Hub Bearing
1 - Zerks per Wheel (Zerk can be on either side)
Type of Lubrication: Wheel Bearing Grease
33123
50
Hours