Land Pride STB1560, Руководство оператора

Страница: 13 / 36

Section 1: Assembly & Set-up
Table of Contents
11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M
9
5. Tighten nuts to proper torque and lower the Snow
Trip Blade to level ground.
Steel Cutting Edge Assembly
Figure 1-1
Poly Cutting Edge Assembly
Figure 1-2
39708
39709
Orange Marker Assembly
Refer to Figure 1-3:
Land Pride offers 28" tall orange markers that can be
bolted to each side of the moldboard. They are ideal for
locating the outer ends of the blade when approaching
buildings, trees, poles, and other obstacles that could be
damaged and/or damage the Snow Trip Blade when hit.
1. Attach 28" orange marker (#4) to outer left edge of
moldboard (#1) with two 5/16"-18 x 1" GR5 hex head
cap screws (#2) and hex nylock nuts (#3).
2. Tighten nuts to the correct torque.
3. Repeat steps 1 and 2 for the right side.
Orange Marker Assembly
Figure 1-3
39690