Land Pride SGC1060 Скачать руководство пользователя страница 25

Страница: 25 / 28

Section 6: Troubleshooting

SGC1060 & SGC1072 Grapples 380-092M

5/18/21

Table of Contents

Troubleshooting Chart

Problem

Cause

Solution

Cannot lift load

Insufficient power to lift load.

Reduce load on grapple or switch to a

tractor that is rated for more lift capacity.

Hydraulic hoses are

stretched and/or damaged

Hydraulic hoses are catching on tree limbs,

debris, or other solid objects.

Replace hydraulic hoses. Stay away from

objects that can catch on hydraulic hoses.

Stop immediately if hoses are catching on

an object and remove object. If helpful,

readjust hose routing.

Hydraulic fittings are

damaged

Hydraulic hoses and/or fittings are catching

on tree limbs, debris, or other solid objects

causing fittings to become damaged.

Replace hydraulic fittings. Stay away from

objects that can catch on hydraulic hoses.

Stop immediately if hoses are catching on

an object and remove object. If helpful,

readjust hose routing.

Claws don’t sufficiently

clamp tight on a load

A load taken from a pile can be too bulky to

properly clamp while in the pile.

Re-clamp load once load is free from pile.

Upper claw does not

operate

Hydraulic hoses are not coupled to tractor.

Reattach couplings to tractor.

Hydraulic hoses and/or fittings are

damaged.

See

“Hydraulic hoses are stretched

and/or damaged”

and

“Hydraulic

fittings are damaged”

above.

Load is shifting

Hitch is not properly attached to front

mounted loader.

Always make certain hitch is properly

attached before lifting a load. Reattach hitch

to front mounted loader if loose.

Load is being carried too high.

Recommended carrying height is as close

to ground as possible without hitting

objects.

Traveling and/or turning too fast.

Reduce speed to a safe non-bouncing

speed.

Traveling sideways to an incline.

Travel straight up and down inclines.

Claws not clamped tight against the load.

Re-clamp load once load is free from pile.

Load is not centered in grapple.

Center load on grapple.

Traveling with bottom teeth tilted down at

the front.

Keep load slightly tilted back to secure its

weight against the bottom grapple teeth.

Teeth are bent.

Straighten bent teeth.

Traveling forward while going down

an incline with a slope in excess of

10 percent (5.7 degrees).

Back down steep inclines.

Teeth are bending or

breaking

The load’s center of gravity is not centered

in the grapple.

Reposition load so that the load’s center of

gravity is centered in the grapple.

Load is too heavy for the grapple.

Lift lighter loads.

Ramming grapple into the ground or load.

Never ram with grapple.

Striking solid objects with the grapple.

Watch for objects while moving and allow

clearance when making turns.

Inspect area thoroughly before working in it

and place markers, such as flags, to

indicate potential hazards.

Prying objects out of the ground.

Never use grapple to pry objects.

Wedging objects between teeth with upper

claw.

Do not wedge objects between teeth with

upper claw.

Section 6: Troubleshooting

Содержание SGC1060





























Результаты поиска

Содержание SGC1060

Отзывы:

Похожие инструкции для SGC1060

Бренды по названию

Популярные бренды

Land Pride SGC1060, Руководство оператора

Результаты поиска

Содержание SGC1060

Отзывы:

Похожие инструкции для SGC1060

Бренды по названию

Популярные бренды