Land Pride RG1060 Скачать руководство пользователя страница 19

Section 2: Operating Procedures 

RG1060 & RG1072 Root Grapples 380-423M

7/17/24

15

Table of Contents

Transport Safety

DANGER

!

To avoid serious injury or death:  

Keep attachment, loader arms, and/or load away from 
overhead electrical power lines. Place an orange warning 
sign under overhead lines indicating type of danger above.

WARNING

!

To avoid serious injury or death:  

Follow all safety precautions when transporting a load. Not 

using safe transporting methods can damage the equipment 
and cause serious injury or death.

Always transport loads as close to the ground as possible 

without hitting objects. A load carried high could shift 
causing the load to fall, tipping of the machine, and/or loss 
of control.

Always transport over ramps and inclines with the heavy 

end of the power machine on the “uphill” side. This may 
require one to drive up or back down inclines.

Always travel straight up and straight down inclines. Never 

make turns on the incline.

Transporting loads across inclines, over ramps, on bumpy, 

soft, or slippery surfaces reduces machine stability and lift 
capacity. Transporting and lifting loads under these 
conditions is extremely dangerous. Follow all transport 
instructions in your power machine Operator’s Manual.

Only travel on public roadways if the attachment is empty. 

Travel in such a way that faster moving vehicles may pass 
safely. Use accessory lights, clean reflectors, and a slow 
moving vehicle sign that is visible from the back to warn 
operators in other vehicles of your presence. Always comply 
with all federal, state, and local laws.

Root Grapple Operation

Picking-Up A Load

WARNING

!

To avoid serious injury or death:  

Use a power machine of adequate size for the load being 

carried. An undersized machine can roll over when raising 
the loader arms due to high center of gravity.

Keep bystanders at a safe distance when entering and 

picking up a load. Objects can shift or be thrown suddenly 
as the attachment makes contact with load causing serious 
injury or death.

Enter pick-up zone carefully making sure no object will 

come through or pass the attachment into the operator’s 
space.

IMPORTANT: 

Do not ram attachment into a pile or 

hook a chain to the attachment to secure a load. 
Doing so can damage the attachment.

1.

Be sure to read and understand all safety alerts 
under 

“Safety Information” 

on page 13.

2.

Make sure load does not exceed rated lift capacity of 
the tractor being used to lift the load.

3.

Check for overhead obstructions.

4.

Center grapple on material to be picked up.

5.

Make a complete stop in front of material and position 
grapple at the proper height to enter the pile.

6.

Fully open upper jaws and slowly drive into the pile. 
Do not ram grapple into pile.

7.

Close upper jaws to secure load.

8.

Lift load a few inches and tilt it back slightly. 

9.

Make sure you have good control of the load. If load 
is not secure, release and recapture load in a more 
secure location.

10. If the grapple is to be operated with the tractor in 

reverse, make sure visibility to the rear of the tractor 
is appropriate.

11. Back load out of the pile slowly making sure load 

clears all other obstacles.

12. Not always will load be secured properly in the 

grapple when pulled free from a pile. Before traveling 
with a loose load, lower load to ground, release load, 
and re-clamp load to make it more secure.

13. Position load at a safe, low traveling height before 

transferring to unloading site.

Traveling With A Load

1.

Be sure to read and understand all safety alerts 
under 

“Transport Safety” 

on this page.

2.

Pedestrians always have the right-of-way.

3.

Keep load tilted back slightly.

4.

When possible, travel with grapple and load kept low 
to the ground.

5.

Continually scan all sides for pedestrians, other 
traffic, and obstacles. 

6.

If load is large and blocks your view, travel in reverse.

7.

Always drive at a safe speed and slow down when 
going around corners. Avoid sudden braking.

8.

Leave enough clearance when turning so that the 
grapple and load does not contact obstacles such as 
vehicles, buildings, trees, or fences. 

9.

When traveling over a ramp or incline, keep load on 
the “uphill” side of tractor.

10. When possible, travel straight up and down grades, 

ramps, and inclines. Avoid making turns on grades, 
ramps, and inclines.

IMPORTANT: 

Close upper jaws with care when 

lifting fragile or hollow objects such as a crate. This 
will help protect the object from being crushed.

Содержание RG1060





























Отзывы: