background image

Introduction 

Table of Contents

RBT55120 Rear Blade 301-172M

11/27/18

6

Introduction

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your 3-Way Rear Blade have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new 
3-Way Rear Blade. If for any reason you do not 
understand any part of this manual or are not satisfied 
with the service received, the following actions are 
suggested:

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

17837

Land Pride welcomes you to the growing family of new 
product owners. This 3-Way Rear Blade has been 
designed with care and built by skilled workers using 
quality materials. Proper assembly, maintenance, and 
safe operating practices will help you get years of 
satisfactory use from this machine. 

Application

The Land Pride RBT55 Series 3-Way Hydraulic Rear 
Blades are built tough from the ground up for applications 
ranging from landscaping, construction, snow removal, 
feedlot cleaning, and all-around farm use. 

They are designed for Category II or III 3-Point hitch 
mounting, attachment to tractors in the 90 to 180 hp 
range, and are Quick Hitch compatible. The blade with its 
reversible cutting edge can be angled left or right up to 
45

o

, the ends can be tilted up or down by as much as 15

o

and the whole blade can be offset to the left or right by as 
much as 33". The blade can also be rotated 180

o

 for 

blading in reverse with same angling, tilting, and offset 
capabilities. A retractable park stand is included to 
accommodate easier blade removal, storage, and 
reattachment.

Available accessories includes manual or hydraulic 
operated single or dual gauge wheel for good depth 
control, end plates for holding material, skid shoes for 
blade protection, hardened wear edge plates for 
extended moldboard life and manual angling, offset, and 
tilting links for tractors with only one or two duplex outlets.

See “

Specifications and Capacities

 

on page 25 and 

Features & Benefits

” on page 26 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
you with safety, assembly, operation, adjustments, 
troubleshooting, and maintenance. Read this manual 
and follow the recommendations to help ensure safe 
and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by 
facing forward in the direction the machine will operate 
while in use unless otherwise stated.

Definitions

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

Содержание REAR BLADES RBT55120



































Отзывы: