Land Pride RCG3715, Руководство оператора

Страница: 44 / 66

Section 4: Options & Accessories
RC(M)3715 & RCG(M)3715 Rotary Cutters 334-114M 1/26/21
40
Table of Contents
Section 4: Options & Accessories
Safety Chain Guards
DANGER
!
To avoid serious injury or death:
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front & rear safety guards is
mandatory with this cutter. Double row chain guards should
be used when cutting along roadways and in areas where
people may be present. Stop blade rotation if bystanders are in
or around the area. It is recommended that a safety shield be
placed between the operator and cutter on an open air tractor.
Land Pride offers two types of safety guards to best suit
your application: single row chain guards and double row
chain guards.
•
Single row chain guards are constructed with a single
row of hanging chain links. They can withstand harsh
applications.
•
Double row chain guards are constructed with rows of
doubled over hanging chain links. The extra chain
provides an additional barrier for stopping thrown
objects.
Single Chain Guards
331-992A Single Row Chain Guards
Double Chain Guards
331-993A Double Row Chain Guards
Tire & Axle Arrangements
Land Pride offers five different tire options to choose from,
with each option available in a 6 or 8 tire configuration.
•
Laminated Tires : Available sizes are 21" and 26"
tires. They are constructed of laminated layers of solid
rubber that will never go flat.
•
New Tires : 25.5", 20 ply tires are available as foam
and air-filled. Both are built tough to withstand the
rugged use a cutter receives, as well as providing a
smoother ride when transporting. Foam-filled tires will
not go flat.
•
Used Aircraft Tires
: Available as a 29" pneumatic tire
or 24" foam-filled tire. They are built tough to withstand
the rugged use a cutter receives and to provide a
smoother ride when transporting.
•
4 - Wheel axle arrangement: Two tires on transport
axle and one on each wing axle.
•
6 - Wheel axle arrangement: Four tires on transport
axle and one on each wing axle.
•
8 - Wheel axle arrangement: Four tires on transport
axle and two on each wing axle.
Hitches
Land Pride offers 5 different hitches to best suit your
application. See “Hitch Types” on page 14 for complete
description of optional hitches.
334-744A Swivel Clevis Hitch
334-460A Bar-Tite Hitch
334-462A Ball Hitch
334-470A Fixed Pintle Hitch
334-471A LP Performance Hitch
Main Drivelines
Land Pride offers two different CAT 6 main drivelines to
best suit your application.
•
CAT 6 constant velocity drivelines allow the operator to
make 80 degree turns. They are heavy duty long
lasting drivelines.
•
CAT 6 constant velocity drivelines with overrunning
clutch have the same features as the CAT 6 Constant
velocity driveline plus the overrunning clutch feature.
The overrunning clutch protects the tractor’s power
take-off on tractors that have instant off power
take-offs by allowing the cutter to slowly stop the
blades without putting strain on your tractor power
take-off.
CAT 6 Constant Velocity
826-643C CAT 6 CV driveline 540 rpm
826-644C Cat 6 CV driveline 1000 rpm
CAT 6 Constant Velocity With Overrunning Clutch
826-884C CAT 6 CV with ORCL driveline 540 rpm
826-793C CAT 6 CV with ORCL driveline 1000 rpm
Wing Fold Options
Land Pride offers four wing folding options to best suit
your application. The dual-acting cylinders have a
smaller transport width than single-acting cylinders.
•
Single acting: Simultaneously raise and lower wings
with single acting cylinders. Uses 1 hydraulic duplex.
•
Dual acting: Simultaneously raise and lower wings
arrow transport width with dual acting cylinders. Uses 1
hydraulic duplex.
•
Independent single acting: Independently raise and
lower each wing with single acting cylinders. Uses 2
hydraulic duplexes.
•
Independent dual acting: Independently raise and
lower wings from narrow transport width with dual
acting cylinders. Uses 2 hydraulic duplexes.
Deck Ring Option
Land Pride offers a deck ring option for extra protection
for the deck sheet and structure. The deck rings are
welded to the underside of the center deck and wing
decks to protect from bent and deflected blades caused
by hitting obstructions.