Land Pride RCG3715, Руководство оператора

Страница: 18 / 66

Section 1: Assembly & Set-up
RC(M)3715 & RCG(M)3715 Rotary Cutters 334-114M 1/26/21
14
Table of Contents
Hitch Types
The following are the five hitch types offered. See your
nearest Land Pride dealer should you want to change
your hitch set-up.
Swivel Clevis Hitch (Optional)
Refer to Figure 1-2:
The Swivel Clevis Hitch pivots side-to-side up to 35
degrees each direction. It features a stop to prevent the
hitch from being installed upside down. Customer to
supply hitch pin and hitch pin keeper
Land Pride Performance Hitch (Optional)
Refer to Figure 1-3:
The LP Performance Hitch is a drawbar friendly,
self-leveling hitch that pivots up and down, and side-to-
side. It is held upright with customer supplied hitch pin to
allow single-person hook-up.
Bar-Tite Hitch (Optional)
Refer to Figure 1-4:
The bar-tite hitch functions similar to LP Performance
hitch except it clamps directly to the drawbar. The bar-tite
hitch is sandwiched between hardened steel plates to
eliminate drawbar wear. It has a bushing in the tongue to
extend hitch life. Bushing and hitch swivel are greasable.
Ball Hitch (Optional)
Refer to Figure 1-5:
Cutter rotation about the tractor drawbar is limited to
swivel movement over the 2 5/16" tractor mounted ball.
Pintle Hitch (Optional)
Refer to Figure 1-6:
Cutter rotation about the tractor drawbar is limited to
movement about the pintle connection. The pintle hitch is
ideal for a drawbar hammer strap.
Swivel Clevis Hitch
Figure 1-2
LP Performance Hitch
Figure 1-3
Bar-Tite Hitch
Figure 1-4
Ball Hitch
Figure 1-5
Pintle Hitch
Figure 1-6
70454
70451
70453
70452