Land Pride RCB5715 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 86

background image

Section 7: Features & Benefits

RCB5715 & RCBM5715 Rotary Cutter 337-046M

7/8/20

77

Table of Contents

Features

Benefits

Tire options

Laminated tires:

Eliminates flats.

Air-filled tires:

Give better cushion while transporting.

Foam-filled tires:

Give better cushion while transporting and can’t go flat.

LP Performance Hitch

TM

(Optional)

One person Hook-up. Great for uneven terrain, reduces drawbar wear. Hitch pivots
freely up and down and pivots about the tractor drawbar up to 12 degrees in both left
and right directions.

Bar-Tite hitch (Optional)

Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Maintenance free tongue & axle pivots

Self lubricating journal bearings make for less maintenance.

Color-coded hydraulic hose handles

Easy hose identification & sturdy handle to easily connect & disconnect from tractor.

Hydraulic hose holders

Tongue mounted hose holder keeps hose tips out of the dirt.

Greasable cast steel, continuous
hinges

Cast steel hinges make a strong connection & are easy to lubricate.

Center axle options

HD Single suspension center axle:

Spring cushion at the cylinder for cushion with

least amount of moving parts.

Independent suspension center axle:

Offers additional suspension support per

wheel axle.

Walking tandem center axle:

Designed for versatility over a multitude of terrains.

Parallel pivot center axle:

Provides unmatched ground contact for hill-like terrains.

Wing axle option

Independent suspension wing axles:

Offers additional suspension support on

each wing axle.

Walking tandem wing axles:

Designed for versatility over a multitude of terrains.

Parallel pivot axles:

Provides unmatched ground contact for hill-like terrains.

Dual-acting fold cylinders (optional)

Allows for a narrow transport width of 7'3" (2.21 m).

Flip spacers

Easily change cut height with a flip of a spacer.

SMV Mounting Socket (Standard)

SMV Sign (Accessory)

SMV mounting socket receives most SMV signs equipped with a mounting blade for
ease of attachment and removal when transporting on a truck or trailer.
SMV sign is offered as an accessory when the tractor’s SMV sign and mounting
blade does not fit the cutter’s standard SMV mounting socket.

RCB5715 & RCBM5715 Models

«
...
79
80
81
82
83
...
»

Содержание RCB5715























































































Отзывы:

Нет отзывов

Похожие инструкции для RCB5715

Personal Cutting System None

Бренд: Xyron Страницы: 24

Бренд: Sigma Страницы: 7

Бренд: Metabo Страницы: 55

Бренд: Larzep Страницы: 8

101 90 47-26 142RB/152RB

Бренд: Husqvarna Страницы: 29

Бренд: Gardeo Страницы: 84

Бренд: REMS Страницы: 68

Бренд: REMS Страницы: 132

Бренд: Mega Machine Страницы: 29

Бренд: Renkforce Страницы: 4

Бренд: Tile Rite Страницы: 10

Бренд: Ruris Страницы: 26

Бренд: Partner Страницы: 16

Бренд: Partner Страницы: 24

Бренд: Kiwi Страницы: 8

Бренд: LaserPro Страницы: 59

Бренд: Royal Catering Страницы: 23

Бренд: Homer Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды