Section 6: Specifications & Capacities
RC(M)5710 & RC(M)L5710 Rotary Cutters 331-433M
6/3/20
70
Section 6: Specifications & Capacities
RC(M)5710 & RC(M)L5710 Models
Specifications & Capacities
Engine horsepower range
60 - 250 hp (44.7 - 186.4 kW)
Gearbox horsepower
540 rpm or 1000 rpm
250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wing
Gearbox lubrication
Gear Lube 80-90W EP
Gearbox oil capacity
Splitter gearbox: 5.5 pints (2.6 L); Blade spindle gearboxes: 12.4 pints (5.87 L)
Cutting capacity
5" (13 cm)
Machine weight
5,740 lbs (2604 kg) Weight includes base unit, five 25.5" aircraft tires, HD single suspension
center & wing axles, 540 CV Cat. 4 main driveline package, front & rear single chain guards,
deck rings, single acting fold cylinders, constant level clevis hitch, and forged blade bars
without bolt-on dishpans.
Tongue weight
2,218 lbs (1006 kg) with the wing down. 2,302 lbs (1044 kg) with wing folded-up.
Blade tip speed
At 540 rpm
At 1000 rpm
Center Blades & Wing Blades = 16,400 FPM (83 mps)
Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)
A-frame tongue
5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
Hitch types
Constant Level Swivel Clevis Hitch, LP Performance Hitch
TM
,
Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.
LP Performance Hitch & Bar-
Tite hitch pivot shaft diameter
2 1/4" (5.7 cm)
Hitch jack
Standard 7,000 lbs (3175.1 kg)
Signal lights
Seven pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Transport width with 21" tires
10'-5" (3.18 m)
11'-11" (6.3 m)
9'-1" (2.77 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option.
Overall length
16'-3" (4.95 m) - With center deck raised fully up.
Deck height
12" (30.5 cm)
Cutting height
1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
Lift hydraulics
3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers.
Wing flex while operating
Max. 20
o
down,
c
an float up as needed as long as the wheel(s) are still on the ground.
Wing hydraulics
3" x 12" hydraulic cylinder, hoses & fittings.
Wing transport protection
Wing Transport Lock Pins.
Deck material thickness
Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
Side skirt construction
Removable/replaceable 1/4" (6 mm) steel.
Deck Armor
TM
option
5/16" (8 mm) Steel plate
Wing Deck skid shoes
One leading hardened beveled skid shoe and one trailing standard beveled skid shoe.
Weight box skid shoes
One leading and one trailing hardened beveled skid shoes that are reversible/replaceable
and one replaceable intermediate beveled skid shoe.
Center deck skid shoes
Two replaceable beveled skid shoes and multiple mounting locations.
Blades - 4 (2 per carrier)
1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift.
Blade overlap
6" (15.2 cm)
Blade bolt
Keyed with hardened flat washer & locknut.
Stump jumper / blade holder
options
Forged blade bar without the dish pan.
Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar.
Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate.
Front & rear guards
Optional single row chain or dual row chain.
Input driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint with or without over-running clutch.
Intermediate driveline
Standard - Category 5 with slip-clutch.
Wing driveline
Standard - Category 4 with slip-clutch or Category 5 with slip-clutch.
Number of wheels
5 - Wheel option: Four on transport axle and one on the wing axle.
6 - Wheel option: Four on transport axle and two on the wing axle.
