Land Pride PS25120, Руководство оператора

Страница: 36 / 40

34
Section 7: Troubleshooting
PS25120 Primary Seeder 313-156M 4/03/14
Table of Contents
Section 7: Troubleshooting
PS25120 Troubleshooting Chart
Problem Solution
Uneven seed spacing or uneven stand Check for plugging in feed cup
Check to see if seed tubes are plugged
Check for plugging in seed broadcasting channel
Reduce ground speed
Check for trash or mud build up on rollers
Actual seeding rate is different than
desired Seed treatment will affect seeding rate if the chemicals build up in feed cup.
Unless cleaned regularly, this build up can cause breakage of the feeder cup
shaft.
Check speed change sprocket
See manual for instructions on calculating seed rate
Acremeter doesn’t measure accurately Check planting operation for excessive overlap or gaps between passes
Loose soil conditions and slippage of front roller will cause variations in acres
registered
Raising and lowering seeder is rough or
uneven on front or end wheel seeders Lubricate wheel arm pivot shaft
Check hydraulic fittings for leaks. Refer to
"Tractor Hydraulic Hook-Up"
on
page 17.
Rephasing cylinders not properly bled. Refer to
"Tractor Hydraulic Hook-Up"
on page 17.
When raising seeder, the cylinders should be fully extended to ensure that they
are always rephased.
Feed cup sprocket locked up or twisted
seed cup drive shaft Check for foreign matter lodged in feed cup sprocket
Rollers not turning freely Check for trash or mud build up on roller ends