
Section 4: Options and Accessories
PD10, PD15, PD25 & PD35 Post Hole Diggers 317-048M
8/9/19
32
Storage Stands
PD10 Part No. 317-166A
PD15, PD25 & PD35 Part No. 317-142A
Refer to Figure 4-20:
The optional storage stand may be used when PD10 Post
Hole Digger is not in operation. It will help prolong
digger’s life by keeping the unit off the ground where
moisture and debris are more likely to collect causing
undue damage to the digger. Also, the storage stand aids
in mounting and dismounting the Post Hole Digger to and
from the tractor.
Storage Stand (PD10 Shown)
Figure 4-20
Storage Stand Assembly
Refer to Figure 4-21:
The Storage Stand Assembly consists of an A-frame
storage stand (#7), clamping knobs (#13), cradle (#5),
and a bag of (4) - 5/16" x 3/4" long bolts.
1.
Unscrew locknuts (#10) and remove 1/2"-13 x 3 1/2"
GR5 hex head bolts (#9). Slide auger (#1) off of
gearbox output shaft.
2.
Remove existing hex head cap screws (#8), lock
washers (#11), and flat washers (#12) from underside
of gearbox and remove auger guard (#3).
3.
Position cradle (#5) between auger guard (#3) and
gearbox (#14). Make sure cradle pins (#2) are
positioned to the back as shown.
20856
Storage Stand Assembly (PD10 Shown)
Figure 4-21
4.
Use four new bolts (#8), lock washers (#11), and flat
washers (#12) in hardware bag to attach cradle (#5),
and existing guard (#3) to gearbox (#14).
5.
Reattach auger to gearbox output shaft with existing
auger bolts (#9) and locknuts (#10).
20867
Содержание PD15 Series
Страница 9: ...Important Safety Information 8 9 19 5 This page left blank intentionally...
Страница 48: ...Section 9 Torque Values Chart Table of Contents PD10 PD15 PD25 PD35 Post Hole Diggers 317 048M 8 9 19 44...
Страница 50: ...Corporate Office P O Box 5060 Salina Kansas 67402 5060 USA www landpride com...