Land Pride MP10, Руководство оператора

Страница: 22 / 32

Section 4: Maintenance & Lubrication
Table of Contents
MP10 & MP20 Moldboard Plows 307-244M 10/29/18
18
Plow Shares
Refer to Figure 4-2:
Plow shares (#1) do the most difficult work and demand
the most horsepower to do the work. They cut the furrow
slice loose and start lifting it up over the share. They
should be kept pointed, sharp, and have the right amount
of down draft or they won’t do their work. Inspect plow
shares and mounting hardware frequently for wear and
replace as needed.
1. Remove hex nuts (#5 & #10), lock washers (#4 & #9),
plow bolts (#2 & #3) and plow share (#1).
2. Using holes “A” in frog (#13), attach new plow
share (#1) with plow bolts (#2 & #3), lock washers
(#4 & #9), and hex nuts (#5 & #10).
3. Tighten hex nuts (#5 & #10) to the correct torque.
Shins
Refer to Figure 4-2:
Shins (#6) receive high wear as they cut the furrow wall
and should be inspected annually for wear. Replace
shims and mounting hardware as needed.
1. Remove hex nuts (#10), lock washers (#9), plow
bolts (#8) and plow share (#6).
2. Using holes “B” in frog (#13), attach new plow
shin (#6) with plow bolts (#8), lock washers (#9), and
hex nuts (#10).
3. Tighten hex nuts (#10) to the correct torque.
Installation of Share, Shin, Moldboard, & Coulter (MP10 Model Shown)
Figure 4-2
Item Pt. No. Description
1 820-619C FORGED ROCK SHARE
2 842-357C CLIPPED PLOW 1/2"-13 X 1 1/2" GR5
3 842-357C CLIPPED PLOW 7/16"-14 X 1 1/2" GR5
4 804-015C WASHER, LOCK SPRING 1/2" PLT
5 803-020C NUT, HEX 1/2"-13 PLT
6 820-620C PLOW SHIN
7 820-621C 14" MOLDBOARD
8 842-349C PLOW 7/16"-14 X 1 1/2" GR5
9 804-014C WASHER, LOCK 7/16"
10 803-015C NUT, HEX 7/16"-14 PLT
11 820-259c COULTER BLADE, 14" DIA. STRAIGHT
12 802-214C RHSNB 1/2"-13 X 1 1/4" GR5
13 307-239H FROG
39214