Land Pride LR16 Series, Руководство оператора, Страница: 22 / 30

Section 4: Adjustments
Table of Contents
LR1660, LR1672, LR1684 & LR1696, LR2684 & LR2696 Landscape Rakes 302-305M 11/27/18
18
Gauge Wheels (Accessory)
Refer to Figure 4-3:
Removing spacers (#4 or #5) from beneath support
arms (#2) will allow the rake to penetrate deeper into the
soil and adding spacers will decrease the depth the rake
can penetrate into the soil.
1. Read and follow all “Safety Alerts” on page 17.
2. Remove wire retaining pin (#3) from yoke shaft (#1).
3. Remove gauge wheel with yoke shaft (#1) from
support arm (#2).
4. Place desired number of spacers (#4 & #5) on the
yoke shaft.
5. Replace gauge wheel assembly (#1) into the support
arm (#2).
6. Place remaining spacers (#4 & #5) on the yoke shaft
above support arm (#2) and reattach wire retaining
pin (#3) to yoke shaft (#1). Make certain wire retainer
is fastened over end of pin.
Flip Down Blade (Accessory)
Refer to Figure 4-4:
The flip down grader blade may be stored in the up
position when not in use and lowered when needed.
Rotate Blade Up For Storage
1. Read and follow all “Safety Alerts” on page 17.
2. Remove hairpin cotters (#4) and bent pins (#3) from
storage holes “A”.
3. Carefully pivot blade (#2) upward until captured by
blade lock handles (#1).
4. Push blade lock handles (#1) fully down to capture
blade (#2) in the up position.
5. Replace bent pin (#3) in lower holes “B” to secure
blade (#2) in the raised position.
6. Secure bent pin (#3) with hairpin cotter (#4).
Rotate Blade Down For Work
1. Read and follow all “Safety Alerts” on page 17.
2. Lower blade (#2) by removing hairpin cotters (#4)
and bent pins (#3) from lower holes “B”.
3. Pull on blade lock handle (#1) to allow blade (#2) to
flip down.
4. Store bent pins (#3) in upper holes “A”.
5. Secure bent pin (#3) with hairpin cotter (#4).
Gauge Wheel Adjustment
Right-Hand Assembly Shown
Figure 4-3
Grader Blade Lock Up Position
Figure 4-4
33895
33896