manualshive.com logo in svg

Land Pride Disc Harrows DH3510, Руководство оператора

Land Pride Disc Harrows DH3510 - надежный инструмент для обработки почвы. Спецификации и вместимость детально описаны в руководстве. Скачайте его бесплатно с manualshive.com и настройте устройство для оптимальных результатов на поле.

Поделиться
Скачать
background image

Section 2: Optional Equipment Set-up 

Table of Contents

DH3510 & DH3512 Disc Harrow 322-251M 

12/7/18

18

Section 2: Optional Equipment Set-up

Back Right & Front Left Scraper Assembly 

Back Left and Front Right Scraper Assembly

Type “A”

25995

25995

Type “B”

Model DH3510 

Disc Harrow

 With Blades Spaced 7 1/2" Apart

Figure 2-2

Disc Scrapers

Refer to Figure 2-1:

Orient disc scrapers as shown in Figure 2-1 to determine 
scraper types. 

The bottom of Type “A” is skewed up to the left and 
mounted on the back right and front left disc gangs. 

The bottom of Type “B” is skewed up to the right and 
mounted on the back left and front right disc gangs. 

Disc Scraper Orientation

Figure 2-1

Scraper Assembly

Refer to Figures 2-2, 2-3, 2-4 & 2-5:

1.

Determine correct orientation of scraper mounting 
brackets (#1) by locate the figure that illustrates your 
Disc Harrow model number and disc blade spacing. 
Be sure to check the disc blade spacing on both the 
front and rear disc gangs as they can be different. 
Mounting brackets for disc gangs with 7 1/2" blade 
spacing will have more square holes than ones with 
9" blade spacings.

Type “B”

Back Left & Front Right 

Disc Scrapers

Type “A”

Back Right & Front Left 

Disc Scrapers

26585

2. Select the correct mounting bracket (#1) for the back 

right disc gang and then orient the square bolt holes 
in the mounting bracket to match the square bolt 
holes in the mounting bracket shown in the 
illustration.

3. Bolt Type “A” disc scrapers to scraper mounting 

bracket (#1) with 1/2"-13 x 1 1/4" GR5 round head 
square neck bolts (#7) and 1/2" hex flange lock 
nuts (#8). Draw nuts up snug. Do Not tighten.

4. Attach scraper hangers (#6) to the long u-bolts (#4) 

with 3/4" flat washers (#3) and 3/4" hex flange 
locknuts (#2). Draw nuts up snug. Do not tighten.

5. Attach scraper mounting bracket (#1) to scraper 

hangers (#6) with 1/2"-13 x 1 1/4" GR5 round head 
square neck bolts (#7) and 1/2" hex flange lock 
nuts (#8). Draw nuts up snug. Do not tighten.

6. Recheck fit-up of the scraper assembly and then 

tighten u-bolt hex flange nuts (#2) and scraper 
hanger locknuts (#8) to the correct torque.

7.

Adjust individual scrapers (#5) to be within close 
contact without touching the disc blade. Tighten 
scraper mounting nuts (#8) to the correct torque. See 

“Disc Scraper Adjustments” 

on page 23 for 

detailed scraper adjustment instructions. 

8. Repeat steps 2 - 7 for the front left scraper assembly 

with Type “A” scrapers. 

9. Repeat steps 2 - 7 for the back left scraper assembly 

with Type “B” scrapers.

10. Repeat steps 2 - 7 for the front right scraper 

assembly with Type “B” scrapers. 

IMPORTANT: 

Disc scrapers (#5) must point in 

towards the disc concave surfaces. Hex head square 
neck bolts (#7) can be inserted from the bottom or 
top when attaching disc scrapers.

Содержание Disc Harrows DH3510













































Отзывы:

Нет отзывов

Похожие инструкции для Disc Harrows DH3510

Бренды по названию

Популярные бренды

Загрузить еще бренды