Land Pride CB0654, Руководство оператора

Страница: 24 / 32

Section 4: Maintenance
1/3/23 CB0654 4-in-1 Combination Bucket 381-218M
20
Table of Contents
Section 4: Maintenance
General Maintenance Information
Proper servicing and adjustment is key to the long life of
any attachment. With careful inspection and routine
maintenance, you can avoid costly downtime and repair.
Check all bolts and pins after using the bucket for several
hours and on a regular basis thereafter to ensure they are
tight and secured.
Check hitch plate fit-up, hydraulic hoses, and hydraulic
fittings on a regular basis to ensure trash or other objects
have not loosened hitch connection points and/or
damaged hydraulic hoses and fittings.
Replace all worn, damaged, or missing bucket parts with
genuine Land Pride parts. Replace safety labels by
obtaining new labels from your Land Pride dealer.
DANGER
!
To avoid serious injury or death:
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment supported
by concrete blocks or hydraulics. Concrete can break,
hydraulic lines can burst, and/or hydraulic controls can be
actuated even when power to hydraulics is off.
WARNING
!
To avoid serious injury or death:
•
Make sure controls are all in neutral position or park before
starting the power machine.
•
Allow only persons to perform maintenance on this
attachment who have been properly trained in the safe
operation of this attachment.
•
Do not alter attachment or replace parts on the attachment
with other brands. Other brands may not fit properly or
meet OEM (Original Equipment Manufacturer)
specifications. They can weaken the integrity and impair the
safety, function, performance, and life of the attachment.
Replace parts only with genuine OEM parts.
•
Check hitch fit-up frequently. An improper fit-up can cause
the attachment to come loose from the loader hitch plate
and fall.
•
Check hydraulic hoses and fittings frequently for leaks or
damage. Fluid escaping under pressure can penetrate skin.
Large leaks can dump a load prematurely.
•
Perform scheduled maintenance. Check for loose
hardware, missing parts, broken parts, structural cracks,
and excessive wear. Make repairs before putting the
implement back into service.
•
Keep body, body extremities, loose clothing, pull strings,
etc. away from pinch points such as rotating, extending,
and/or retracting components. Secure pinch point areas to
ensure they will not move before working on or near them.
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the attachment when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the bucket. Scrape off compacted
dirt and then wash its surface thoroughly with a
garden hose.
2. Inspect bucket for loose, damaged, or worn parts
and adjust or replace if needed.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
4. Replace all damaged or missing guards & decals.
5. Close the jaw and store the bucket on a level surface
in a clean, dry place. Inside storage will reduce
maintenance and make for a longer bucket life.
6. Do not allow children to play on or around the stored
bucket.
Land Pride Touch-up Paint
Part No. Part Description
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN