background image

54

Section 7: Features & Benefits

ZSR54, & ZSR60 Accu-Z Razor

®

 Zero Turn Mowers   357-344M

Table of Contents

7/01/14

Ergonomically designed
control console

Instrumentation and console controls are positioned for easy visual and fingertip access.

Hour meter

Measure actual engine run time to monitor service intervals.

Sleek styling twin six gallon fuel
tanks with extra large fuel caps

12 Gallon fuel capacity for plenty of operating range and decreased downtime.
Extra large fuel openings for easy fueling. Fuel caps are placed inboard and center mounted
to protect caps from damage and prevent overflow spills on inclines.

Fuel selector/shutoff valve

Provides on the go switching from one tank to another giving the operator time to finish the
mowing job and to return to the refueling source before the mower stops running. Both tanks
can be shutoff with this valve for servicing and storage.

Molded-in dual cup holders and
storage compartments

Tanks are molded with cup holders that fit a wide variety of cups and are in easy access to the
driver. A storage compartment molded next to the cups offer additional operator convenience.

Lever activated park brake

A manually activated over-center park brake lever located next to the operator’s left side for
easy activation and release of a spring applied pawl over cog brake in the transaxle.
Mower will not move until brake is released.

Hinged seat platform

Provides easy service access to the compartment below the seat and is spring mounted for a
smoother ride. Requires removal of only one bolt for quick access to components below.

Comfortable adjustable seat

Deluxe Cushion suspension with molded high back, adjustable arm rests, and adjustable
seat positioning for operator comfort and sustained productivity.

Seat safety interlocks

Rising off of the seat with blades engaged will cut engine power and stop blade rotation.
Engine cannot be started with blade engagement switch in “on” position.

Bolted on floor platform

Provides service access to topside deck components.
Requires removal of only 2 bolts for quick access.

Certified ROPS

Certified ROPS for added operator protection.

Electric deck lift option

M

akes lifting and lowering the deck easier.

Sun canopy accessory

Makes mowing more comfortable on hot sunny days. Helps protects against harmful sun
rays. Designed to fit the folding ROPS.

EPA Compliant Mowers

EPA approved six gallon fuel
tanks with sight gauge, extra
large tethered fuel caps and
vent valve

12 Gallon fuel capacity for plenty of operating range and decreased downtime.
Extra large fuel openings for easy fueling. Fuel caps are EPA approved, non vented, placed
inboard, and center mounted to protect caps from damage and prevent overflow spills on
inclines. EPA vent valve help stops fuel leaks in rollover accidents and sight gauge makes it
easy to see low fuel level in tanks.

Fuel tanks are vented to the
engine carburetor

Engine burns fuel vapors instead of vapors leaking into the atmosphere.

ZSR54 & ZSR60 Models

Features

Benefits

Содержание 357-344M































































Отзывы: