LANCOM OAP
-
54
-
1 Wireless – LANCOM OAC
-
54
-
1 Wireless
Chapter 5: Advanced wireless LAN configuration
60
EN
햳
In 'Scan bands', define whether the client station scans just the 2.4 GHz,
just the 5 GHz, or all of the available bands to locate an access point.
Under WEBconfig or Telnet the settings for client mode can be found
under the following paths:
5.4.2
Set the SSID of the available networks
In the WLAN clients, the SSIDs of the networks to which the client stations are
to connect must be entered.
햲
To enter the SSIDs, change to the 'General' tab under LANconfig in the
'Wireless LAN' configuration area. In the 'Interfaces' section, select the
first
WLAN interface from the list of logical WLAN settings.
햳
Enable the WLAN network and enter the SSID of the network the client
station should log onto.
Configuration tool
Menu/Table
WEBconfig
Expert configuration
Setup
Interfaces
WLAN
Client
modes
Terminal/Telnet
Setup/Interfaces/WLAN/
Client modes
