LANCOM OAP
-
54 Wireless and LANCOM OAP
-
310agn Wireless
Preface
3
EN
Preface
Thank you for placing your trust in this LANCOM Systems product.
The LANCOM OAP Wireless are designed to offer high-performance wireless
LAN in tough environments.
The housing that conforms with IP66 and the facilities for sturdy mounting on
walls or poles all make the LANCOM OAP-54 Wireless ideally suited for loca-
tions where the demands on stability and robustness are at their highest.
Depending on the model equipped with an integrated heating and cooling the
devices enable operation in temperatures from -30° to +70°C (LANCOM
OAP-54 Wireless) and -30° to +65°C (LANCOM OAP-310agn Wireless)
respectively.
With the integrated 54/108 Mbps WLAN module according to IEEE 802.11a/
h or IEEE 802.11b/g the LANCOM OAP-54 Wireless work in the 2,4 or 5 GHz
frequency range. The LANCOM OAP-54 Wireless comes with two WLAN
modules and hence can work in both frequency ranges simultaneously.
The LANCOM OAP-310agn Wireless additionally supports the standard IEEE
802.11n and offers a maximum WLAN performance with up to 300 Mpbs.
MIMO (multiple input multiple output) technology allows the LANCOM OAP-
310agn Wireless to transfer several data streams in parallel and thus signifi-
cantly improve data throughput.
The modells of the LANCOM OAP Wireless series can be configured in standa-
lone, managed and client mode. In managed mode, the access point can be
securely managed by the LANCOM WLAN Controller.
Model variants
This documentation is intended for LANCOM OAP Wireless users. The
following models are available:
The LANCOM OAP-54 Wireless with two integrated WLAN modules.
The LANCOM OAP-310agn Wireless with support for IEEE 802.11n stan-
dard and connectors for up to three antennas.
Model
restrictions
Passages applying only to certain models are identified either in the text itself
or by a comment in the margin.
Otherwise the documentation refers to all models collectively as the LANCOM
OAP Wireless series.
