Lancom GS-1224, Руководство пользователя

Страница: 13 / 66

LANCOM GS - 1224
쮿
Chapter 2: Installation
12
EN
2.3.2 Connectors on rear of the LANCOM GS-1224
The following connectors are located on the rear of the device.
쐃
Connector for the power supply cable.
2.4 Mounting and connecting up the LANCOM Switch
Installating the LANCOM Switch involves the following steps:
햲
Mounting – The device is designed for mounting in an available 19” unit
in a server cabinet. If necessary fix the rubber pads to the underside of the
device to prevent any scratching to other equipment.

Ensure that the device has sufficient ventilation to prevent damage
from excessive heat build-up.
햳
LAN connection – Connect the network devices to the ports of the
LANCOM Switch by means of a suitable twisted-pair cable (TP cable). The
connectors automatically detect the avalable data transfer speeds and the
pin assignment (autosensing).

Use only standard TP cables of category CAT 5e or better with a maxi-
mum length of 100 m to ensure the best possible transfer of data.
Cross-over cables can be used thanks to the auto-sensing function.

If optical connections are to be used, additional modules can be
purchased as accessories.
햴
Supply power and switch on – Supply power to the device by means of
the IEC power cable.
햵
Ready for operation? – After a brief self-test, the power LED lights up
continuously. Green LAN-LINK LEDs show which LAN connectors are
being used for a connection.
쐃
LANCOM GS-1224