LANCOM Routers, WLAN Routers, Access Points and WLAN Controllers
First steps
2
Firs
t steps
햲
Installing software
If you use a Windows PC for configuration, you should
Install
LANtools
(LANconfig and LANmonitor of the included CD).
Alternatively, or in case of other operating systems, it is possible to
use a
web browser
for configuration.
햳
Setting up and connecting the device
Put up LANCOM/mount
. While doing so, please
follow
the installation
advices regarding the ambient conditions, stackability etc. of the technical
data in the
User‘s Manual
.
Some devices (e.g. with integrated ADSL modem) may become quite
warm in operation. For these models, ensure an ambient air tempera-
ture of 35°C at maximum. Take care of sufficient ventilation. Do not
stack devices and do not expose them to direct insolation!
Install/connect
additional
antennas
for LANCOM Wireless devices, if
necessary.
Antennas are only to be attached or changed when the device is
switched off. Mounting or demounting antennas while the device is
switched on may cause the destruction of the WLAN module! When
installing outdoor antennas, the instructions on installation and
grounding in the LANCOM Outdoor Wireless Guide must be observed.
Connect
LAN and WAN ports
to the corresponding remote stations.
When connecting the Ethernet interfaces, please ensure that the two
devices being connected (e.g. switch and LANCOM) both have the
same setting for auto mode. If a LANCOM is connected to a switch
that does not support auto mode, or if this function has been
deactivated in the switch, then auto mode must also be deactivated
Содержание 800+
Страница 1: ...LANCOM Installation Guide c o n n e c t i n g y o u r b u s i n e s s...
Страница 2: ...LANCOM Installation Guide...
Страница 5: ......
