LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 2: Installation
33
EN
2.3.1
Device connectors
The connections and switches of the router are located on the back panel:
LANCOM 1811n
Wireless
LANCOM 1821n
Wireless
Connector for antenna 1 (LANCOM 1811n Wireless) respectively antenna
3 (LANCOM 1821n Wireless) in MIMO mode.
Connection for the included power adapter
Antenna 2 is an internal antenna that does not have an external con-
nector.
Second Ethernet socket (10/100Base-Tx) for connection to the LAN. Both
10 Mbit or 100 Mbit connections are supported. The available transfer
rate is detected automatically (autosensing).
LANCOM 1811n
Wireless
WAN connector
USB connector (USB host)
ISDN/S
0
port
Serial configuration port
LANCOM 1821n
Wireless
ADSL port
Reset switch
Connector for antenna 3 (LANCOM 1811n Wireless) respectively antenna
1 (LANCOM 1821n Wireless) in MIMO mode.
Reset
ETH3
ETH4
ETH2
ETH1
ISDN S
0
WAN
Config(COM)
Antenna 1
Antenna 3
USB
Reset
DC12V
ADSL(2+)
Config
USB
(COM)
Ant 3
Ant 1
ETH 3
ETH 4
ETH 2
ETH 1
ISDN S
0