LANCHONLH HG-UV98, Руководство пользователя

Страница: 45 / 47

Ｏｐｔｉｏｎａｌ Ａｃｃｅｓｓｏｒｉｅｓ
７６
Desktop Charger Headphone Cable Hand Mic Programming Cable
Ｂｅｆｏｒｅ ｄｅｃｉｄｉｎｇ ｔｈａｔｔｈｅｒｅ ｉｓ ｉｎｄｅｅｄ ｓｏｍｅｔｈｉｎｇ ｗｒｏｎｇ ｗｉｔｈ ｔｈｅ ｗａｌｋｉｅ－ｔａｌｋｉｅ， ｃｈｅｃｋ ａｇａｉｎｓｔ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｔａｂｌｅ． Ｉｆ ｔｈｅ ｐｒｏｂｌｅｍ ｐｅｒｓｉｓｔｓ， ｙｏｕ ｍａｙ ｉｎｉｔｉａｌｉｚｅ ｔｈｅ
ｗａｌｋｉｅ－ｔａｌｋｉｅ． Ｓｏｍｅｔｉｍｅｓ ｔｈｅ ｉｎｃｏｒｒｅｃｔ ｏｐｅｒａｔｉｏｎｓ ｃａｎ ｂｅ ｃｏｒｒｅｃｔｅｄ．
Fault Solution
The walkie-talkie cannot be started. No
power
>>The battery may have run out. Please replace with a new battery or recharge it.
>>The battery may not be installed properly. Please remove the battery and reinstall it.
>>The battery pack has entered theprotection state. Please reactivate it using the
attached charger before use.
The battery doesn’t last long after being
charged >>The battery life has expired. Please replace with a new battery.
>>The battery is not fully charged. Please ensure that the battery ais fully charged
before use.
The receiving light continues to turn on,
but the loudspeaker is silent >>Make sure the volume is turned up loud enough.
>>Whether a different CSS from that of other team members has been set. Please recheck
and set up the CSS.
>>Whether the mute mode has been set properly
No response when the key is pressed >>Whether the keyboard has been locked
>>Whether any other key has been stuck
In the standby state,
the walkie-talkie transmits
automatically,even when [PTT] is not pressed.
>>Whether VOX has been turned on and whether the level is too low
模
Some functions cannot be stored
>>Whether the walkie-talkie is working in channel mode. Some menus cannot be stored in
channel mode unless they are edited using programming software.
Other voices (of non-team members) are
presentin the channel
>>Please change the CSS frequency of all team members.
2A Car Charger
Ｔｒｏｕｂｌｅｓｈｏｏｔｉｎｇ
７７