2
CONTINUED ON NEXT PAGE
Lancer PN: 28-3015
More than likely, a grounded power strip will be
required for monitor to reach a grounded electrical
outlet.
NOTE
10. Position the new Merchandiser Frame in place,
starting at the top of the unit.
11. Slide the Merchandiser Frame into place with the
bottom of the frame sliding behind the valve plate.
12. Install new self-tapping screws into the existing screw
placements removed in Step 9.
13. Remove the Monitor Bracket from the Merchandiser
Frame by lifting up and pulling away from the frame.
14. Slide the top of the Monitor into the top of the Monitor
Bracket then place the bottom of the monitor into the
lower portion of the bracket.
15. Secure the Monitor Bracket to the back of the Monitor
using the screws and nuts included in kit.
16. With the new Monitor installed to the Monitor Brack-
et, re-install the Monitor Bracket to the Merchandiser
Frame.
17. Plug the Monitor power cord into the back of the
Monitor.
18. If the unit utilizes an ice-maker: Run the power cord
out the top of the Merchandiser Frame and alongside
the ice-maker then plug into a grounded electrical
outlet.
Keep the front ice bin lid installed during installation
and operation of the Monitor.
!
ATTENTION
19. Alternatively, run the power cord down behind the
valve plate and splash plate and plug into a grounded
electrical outlet.
