![Lancaster CBF054 037P Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/lancaster/cbf054-037p/cbf054-037p_assembly-instructions-manual_672515019.webp)
FIG. 22
27
x1
LI-POLYMER BATTERY
POLARITY: RED WIRE + / BLACK WIRE -
BATTERY MANUFACTURER: SHENZHEN CHAOLIYANG TECHNOLOGY DEVELOPMENT CO.,LTD.
ITEM NO.: CLY401230
NOMINAL VOLTAGE: 3.7 V
RATED CAPACITY IN mAh: 100 mAh
MANUFACTURE DATE: 12/07/2020
DO NOT INCINERATE OR EXPOSE TO FIRE.
DO NOT DISASSEMBLE OR SHORT CIRCUIT THE BATTERY.
THIS BATTERY MUST BE RECYCLED OR DISPOSED PROPERLY.
MADE IN CHINA
Note: Battery information for hover puck ONLY
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
For additional resources, please contact Medal Sports Corp. 1300 Melissa Drive, Suite 124, Bentonville, AR 72712
Toll Free: 877-472-4296
NOTE
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
•
•
•
DISCLAIMER
26
Note: Plug the USB Power Cord (27) into
the back of the Hover Puck (26). Allow
the Hover Puck to charge for 60 minutes.
Note: Insert USB Power Cord
(27) into the USB Power plug.
USB Power
(Not Included)
C H A R G E R I N
OFF
MADE IN CHINA
ON
DC 6V
Charging in
27
English
HOVER PUCK TO CHARGE
CBF054_037P
www.wearespreetail.com
18
(The last page)
Содержание CBF054 037P
Страница 20: ...www wearespreetail com ...