Plastic High Chair
ASSEMBLY INSTRUC TIONS
PL A S TIC HIG H CH A IR • A SSEMB LY IN S TRUC TIO N S
W W W. L A N C A S TER TA B LE A NDSE ATIN G .COM
Upper screw cover: 4 pcs
Small screw cover: 4 pcs
Lower screw cover: 4 pcs
C1
C
B
C
B
A
A
R
R
A
B
STEP 2
Connect safety bar (C1) into seat (B1) into the three connecting points.
STEP 3
Align the pins on the front of the seat (B1)
with the holes on both interior sides of the
chair legs (E). Swing the seat back into a
horizontal position and use four screws to
fasten it. Use the small screws (G) in the
front bottom and top holes of the seat.
Press twelve screw covers into the screw holes as shown: place the upper screw covers (A) on the top four holes, the small
screw covers (C) on the middle four holes on the chair legs, and the lower screw covers (B) on the bottom four holes of
the chair legs. For the covers with notches, ensure that they are aligned with the notch hole in the screw cover opening on
the chair.
STEP 4
