Lancaster Water Treatment ONE E3-M, Инструкция по установке и эксплуатации

Страница: 4 / 12

4
ASSEMBLY INSTRUCTIONS
STEP 1: TANK ASSEMBLY (SEE DIAGRAM ON PREVIOUS PAGE)
STEP 1B
Connect #3 to #2 on the bottom of Filter Housing #1. The threaded Drain Valve Assembly
should be on the inlet side (right side) at the bottom of the tank.
HAND TIGHTEN ONLY.
STEP 1A
Wrap #9 (Drain Valve Assembly) with three clockwise wraps of Teflon
®
tape. Install/thread
#9 (Drain Valve Assembly) into #3. HAND TIGHTEN ONLY.
STEP 1C
Connect #4 to #3; Flow Meter Assembly should be placed on the Outlet Side (left side)
at the bottom of the tank. Connect #5 Bypass to #3.
HAND TIGHTEN ONLY.
STEP 1D
Connect #6 to #4 and #5. HAND TIGHTEN ONLY.
STEP 1E
Use either part #7 or #8 for connecting your plumbing to the system.
HAND TIGHTEN ONLY.
STEP 1G
Install 3-AAA batteries in umbrella
cap; connect to power supply.
STEP 1F
Connect 3/8" PEX plumbing to Drain Valve Assembly #9 (NOT PROVIDED).