Lanberg RO Series, Быстрое руководство по установке

Страница: 29 / 32

Quick Installation Guide
Broadband routers
PL | EN
E-mail: support@lanberg.eu
www.lanberg.eu
Lanberg © 2015-2018
29 | 32
If you need to configure one of the Internet connection modes (WAN):
Client, WISP, Repeater (3.5.8
- 3.5.10):
Step 1) On the left multilevel menu, expand the „ Home ”
drop- down list, and then click on the following sub -
section „ Operation Mode ”,
Step 2) From the select list of device’s possible operation
modes, select flag „
Repeater / Wireless ISP / Client ”,
then choose below on what frequency „ 2.4GHz ” or
„
5GHz
” router is to connect to wireless network to the
target device and press „
Save
”. The router will apply
new settings in approx. 30 seconds,
Step 3) After the device window is reloaded, press the „ Setup Wizard ”.
3.5.8) Repeater mode setup of the device
Step 1) On the newly opened window select the
internet connection type by choosing
the „
Repeater
” flag ,
Step 2) Press „ Next ” button ,
Step 3) Further part of the configuration (Wi - Fi)
is described in 3.5.12 section. Please
refer to annotation no. 1
,
Step 4) Further part of configuration of connection of the router with the target access point via the Wi - Fi
network is described in 3.5.13 section.
3.5.9) Wireless ISP (WISP) mode setup of the device
Step 1) On the newly opened window select
the internet connection type by
choosing the „
Wireless ISP (WISP) ”
flag”,
Step 2) Press „ Next ” button ,
Step 3) Further part of the configuration (Wi - Fi)
is described in 3.5.12 section,
NOTE: Access to the WAN section will be hidden.
Step 4) Further part of configuration of connection of the router with the target access point via the Wi - Fi
network is described in 3.5.13 section.