Quick Installation Guide
Desktop type PoE+ switches
PL
| EN |
BG
E-mail: [email protected]
www.lanberg.eu
Lanberg © 2015-2020
7
|
14
1)
Important pre-recommendations and information regarding desktop type PoE+ switch
usage
1.1)
Introduction
PLEASE KEEP THIS MANUAL – set of recommendations and user manuals for Lanberg desktop type PoE+
switches, detailing the models supported below:
•
DSP3-1005-60W
contains logistics and technical data, instructions and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user’s
manual. Keep this manual for later use. All photos, drawings contained in the manual are for reference
only.
NOTE
: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.
1.2)
Contents of the package
•
Desktop type PoE+ switch (DSP3-1005-60W),
•
Quick installation guide,
•
Power supply: DSP3-1005-60W model: AC 100 V ~ 240 V, 50 / 60 Hz, 1.8 A, DC 53 V, 1.12A,
NOTE
: The contents of the packaging, its individual elements and desktop type PoE+ switches may vary
depending on the particular model.
1.3)
General safety precautions
•
The device specifications must be strictly observed when turning the product ON, using it and
connecting the equipment to any external products,
•
The device must not be used to work outside the rated values: 48 ~ 57 V, 50 / 60 Hz (switch).
Any damage caused by a deviation from these values when using the device is not covered by the
warranty,
•
Mains outlet (AC) should be easily accessible and located near the equipment. Remember to connect
the device only to a grounded socket,
•
NEVER
allow a situation where sparks or flames could occur near the device. Aftermath of such
situation could have very negative consequences for people and things in the vicinity,
•
If smoke comes out of the device, disconnect the AC power supply as soon as possible,
•
In the event of a fire, immediately and (without unnecessary delay) disconnect the power supply and
notify the fire department of the situation by dialing their assigned emergency number, in the country
of your stay,
•
The use of the device does not require specialized training or electrical qualifications. It has a similar
function to the PoE / PoE+ switches, with the indication of its intended use to power compatible
terminal equipment. The device can be used for IP, CCTV surveillance, access points in hotels,
warehouses, companies, etc.,
•
The product is intended for indoor use. Do not rebuild and / or modify the products and / or its
components,
•
The manufacturer and distributor are not responsible for any damages resulting from improper use
and improper handling of the product (not in accordance with this manual).
