Lanaform LA120322, Руководство пользователя

Страница: 8 / 84

8
/ 84
• Provides help with soothing respi-
ration through its light cycles
• Light separate from diffusion
• Switches off automatically
Preparation 2
01 Put the Moya diffuser in the room
half an hour before turning it on to al-
low it to adjust to room temperature.
02 Make sure it is always placed on a
hard, flat and horizontal surface.
03 Make sure the device is clean
before starting to use it.
04 Remove the ceramic cover .
05 Then remove the reservoir cover .
06 Pour fresh, preferably demineralised
water into the reservoir and do not
exceed the maximum level .
07 Pour 3 or 4 drops of essential
oil into the water .
08 Replace the reservoir cover
then the ceramic cover .
09 Make sure your hands are completely
dry when connecting (and even
disconnecting) the device .
10 The diffuser is now operational.
Instructions for use 3
Adjusting diffusion and timer
• Press once on the button for adjusting
diffusion and timer 1 to start diffu-
sion. It runs in continuous diffusion mode
by default; three indicators light up
• Press a second time on the button for
programming diffusion for 1 hour; the
indicator on the left lights up .
• Press a third time on the button for
programming diffusion for 3 hours;
the middle indicator lights up .
• Press the button for programming dif-
fusion for 8 hours a fourth time; the in-
dicator on the right lights up .
• Press the button for stopping dif-
fusion a fifth time; there are no
longer any light indicators .
• To go to intermittent diffusion
mode (30 seconds ON; 30 sec-
onds OFF), press the button for 2 sec-
onds; a light indicator will flash.
• Repeat this operation to go back
to continuous diffusion mode
The timer is not interrupted when the dif-
fusion mode has changed.