5
· E
N
G
LI
SH
EN
storing your heating plaid for
a long period, store it in a dry
place.
C
arefully check the con-
dition of your heating plaid be-
fore operating it again for the
first time.
I
f the power cable ap-
pears damaged, do not operate
the device.
C
hildren should not
use this heating plaid on their
own.
I
t should be used as ad-
vised by a responsible super-
vising adult.
T
his heating plaid
should not be used by young
children or persons insensitive
to heat.
T
he remote-control’s
electronic components heat up
when using the electric blanket.
Y
ou must not therefore cover the
remote control or put it on the
electric blanket when the elec-
tric blanket is being used.
Use of the heat-
ing plaid
Diagram and description
1
OFF-ON-OFF button
2
Temperature control
3
Timer control
4
“Pre-heat” mode
5
Indication of temperature intensity level
6
Indication of length of use
Introductory remarks on the
use of the heating plaid
The LANAFORM heating plaid is intended
for warming the human body. It should be
used either:
• Wrapped around you
• In this case, make sure the cord is po-
sitioned so that you cannot trip.
• Make sure that the heating plaid is
connected near a power outlet.
• Make sure that the remote control
is easily accessible and not placed
under a pillow or another object.
• Do not wrap the heating plaid around
you so that you can no longer move
freely. Always leave a space be-
tween yourself and the blanket so
that you can have easy access to the
remote control or the power plug.
• Or like a plaid cover on a bed (and not
under the person like a mattress cover)
• In this case make sure that the re-
mote control is easily accessi-
ble and not placed under a pil-
low or another object.
Safety
This heating plaid is equipped with a safety sys-
tem. An electronic sensor prevents overheat-
ing of the heating plaid over its entire surface
by automatic shutdown in case of failure or
when the connector is not properly connect-
ed to the power cable.
• If the temperature indicator (5) is dis-
playing the letter “P”, turn the cover to
the “Off” position. Check that the plug is
securely plugged in and turn the plaid
on again. If the light is still displayed,
this means that the plaid’s internal
E-IM-HeatingOverblanket-010-2023.indd 5
E-IM-HeatingOverblanket-010-2023.indd 5
15-03-23 16:37:18
15-03-23 16:37:18
