5
Mounting and Set Up Instructions
● Find your extender mounting location and secure with appropriate
screws using the 4 mounting tabs and ensure there is ample space for
making your wiring connections.
● Do not cover the extender or block the airflow to the product with any
foreign object. Keep the extender away from water, excessive heat and
humidity, and free from vibration and dust.
● Ensure that the cable length from the incoming PoE and Ethernet
Data source does not exceed 100 meters (328 ft.).
● Ensure that the cable length from the ‘Data & PoE OUT’ on the LP-
2340 to the IP Device does not exceed 100 meters (328 ft.).
● There is no "on-off" switch - when connected correctly the LP-2340
is operational and no programming is required.
Connections
1. Connect the
“Data & PoE IN” RJ-45 port to your PoE Ethernet switch
or Midspan PoE Injector using an Ethernet cable (CAT 5 or higher).
2. Connect the
“Data & PoE OUT” RJ-45 port to your IP connected
device, using an Ethernet cable (CAT5 or higher).
3. If there is no incoming PoE Power or this is a 3
rd
Unit in a Single
Channel, connect the LP-2340PSU-Mains Power Supply Unit to the
“Optional 48VDC Input” (above the ‘Data & PoE IN” RJ-45 port)
Application Overview
Using INCOMING PoE Power from PoE Ethernet Switch or Midspan
PoE Injector and provide power to IP PoE Device
Using optional LP-2340PSU to power LP-2340 and provide PoE to IP
