Lamtec FA1, Быстрая справка

Страница: 11 / 22

10
5 Operating Unit
5 Operating Unit
5.1 Use of the Operating Unit
With the operating unit you may operate and the program the burner control system.
5.2 Connecting the Burner Control FA1
1. Connect the operating unit to the FA1 by using a 9-pin Cannon connector. To do so, use
the supplied connecting cable, type 663R0430.
Data transmission takes place by the LAMTEC SYSTEM BUS.
2. Alternatively:
Connect the operating unit with the cable of the customer interface. An adapter cable,
type 663R0426, is supplied for this purpose.
Disconnect the 6-pin connector from the customer interface and connect the adapter cable
to the 6-pin connector.
Fig. 5-1 Connection of the operating unit