Lamtec 662R2127, Инструкция по эксплуатации

Страница: 9 / 40

Sicherheitshinweise für
die Montage
Safety References for
the Assembly
Indications de sécurité
d'assemblages
Kap. 2
Safety References for the Assembly
Depending upon that, at which time and under which site conditions
you install the control drive, special safety aspects are to consider.
•
The assembly and start-up of the drive may take place only via
qualified specialists, who have both founded mechanical and
electrical knowledge!·
WARNING
Before an assembly or a repair of a control drive all
equipment/machine/plants concerned are to be switched off
and if necessary to be separated from the mains supplement
WARNING
Before switching off device/machine/plants, it is to be examined
compellingly whether switching off cannot exhibit danger
moments. In Particular This applies to proceed-technical
plants
! ·
•
Disconnections are only after previous consultation with the
operating manager, shift leaders or safety engineer to accomplish!
•
Disturbances are immediate to announce the operating manager,
shift leader or safety engineer for danger warning!·
•
Convince, that pneumatic or hydraulic equipment/machine/plants
before the assembly and/or repair are pressure-free or arrange this.
If this should not be possible for different reasons, meet safety
precautions, which provided damage for humans, environment and
equipment/machine/plants!
•
Secure it your working place and guarantee it, that the
equipment/machine/plants, on which you work, can’t be taken
unintentionally starting!·
•
When assembling or repair of a control drive, in each case the
applicable safetyrules for the prevention of accidents of the
professional association are to be considered!·
•
Convince yourselves before the assembly/repair over correct
function of the safety devices!