SYUGR
The following instructions must be kept
SYUGR20W INSTRUCTIONS
➢
Only qualified electrician is allowed to do the installation, maintenance and inspection for safety concern.
It is dangerous for non-professional operator.
➢
Ceiling-installation only.
➢
Do not install the product in high temperature or humid place.
➢
75mm space should be left around the product for ventilation, no cover on the light at any time.
Installation
1. Turn off the power
2.
Drill a suitable mounting hole on ceiling according to size
requirement of different item
3. Connect main power cable (230V) to the downlight Led driver
4. Make sure the spotlight is connected to the output of the LED driver via
the quick connector
5. Position the LED driver through the hole provided
6. Pinch both springs, then push light into installation hole. Make sure the
light fixed well.
7. Turn on main power
DIMENSIONS
Technical parameters
www.lampolighting.com
Cod.
SYUGR20WBN
Input voltage Led driver (VAC)
220-240V AC
Input voltage downlight (VAC)
25-29V AC
Current(mA)
700mA
Power (W)
20W
Color Temperature (K)
4000°K
Lumen (Lm)
1800Lm
Lifespan (hours)
50000h
Power Factor
>0.9
UGR
<19
CRI
>80
IP Value
IP20
Cut hole (mm)
Φ145-155
Working temperature (°C)
-20 +40
Turn-on time
Full instant light
WARNING
* Power must be cut off before installation, maintenance or inspection.
* Please install and use the light strictly according to the instruction.
* Do not disassemble or tamper the product at will to avoid accident of electric shock or light
falling.
(ENG)