2
Dimensions & weight
= 0,3 Kg
Technical data
-
Adjustable aluminium body
-
IP40 protection rate
-
3 leds RGB 1.2W Xlamp by CREE
-
Approx. 10 years life (continued use)
-
Built-in RJ45 female connector
ATTENTION!!!
Connect the projector only to dedicated power unit.
Up to 20 meters total connection cable (series connection
with UTP straight patch cables
).
The power unit (LED POWER RGB) can drive up to 10 Mini Ceiling Led RGB.
Storage
The projector, in its original packing, must be kept in covered, dry areas with a temperature between –10°C and +50°C.
Attention, the projector will be damaged during the unpacking.
Admissible environmental conditions
The projector was engineered and produced to function in in-door areas with an air temperature ranging between -10° and
+30°C and with a humidity level between 30 and 90%.
When choosing the installation, please make sure that the device is not exposed to extreme heat or in small area.
If the projector is installed in hot area, led life is decreased.
Installation
The projector is studied for false ceiling installation.
Make hole, from 81 to 85mm diameter, on the false ceiling and insert the projector inside.
Springs will allow the projector to stay in place.
