5
9
Adjusting the door position
Adjust the door parallel to the upper track with 7 - 13 mm of clearance between the door and floor
.
右
上
下
左
2 mm
2 mm
Depth adjustment
screw
Vertical adjustment range: 6 mm
Right
Upper
Down
Left
Turn clockwise = go up
Turn counterclockwise = Decrease
7
3 mm
3 mm
Vertical adjustment screw
10
Adjusting the floor guide
Slowly open and close the door, then, adjust the floor guide
so that its interference with the groove under the door is minimized.
2 mm
2 mm
Floor guide
Adjustment range:
±
2 mm
11
Fastening the Jump Prevention Nut
The jump prevention nut is on the hanger bolt of the upper roller. Tighten the nut with the provided spanner wrench until it
contacts the soft closer.
Jump-up
Prevention
nut
Tighten
Do not turn the adjustment screw beyond
adjustment range.
Caution
Be sure to tighten the nut
to prevent damage.
Caution
Do not turn adjustment screw beyond adjustment range.
Do not use electric screw driver.
Right
Upper
Down
Left
Gap
Jump prevention nut
Depth adjustment range: 4 mm
