2
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: +81 (0)3 3866 2260
E-mail:[email protected]
2020.02 1235-3
【1】
Remove bracket from furniture.
①
Hold the jack from back side.
②
Pry either of the bracket lips away
from the jack.
③
Remove the jack from the back side.
If there is interference with
an adjacent component
hook the jack claw on the
opposite lip.
Assembly
【
2
Starting from either end,
Hook the jack onto the lip
of the bracket and push
until a click sound is heard.
Removal of jack
Removal of cover
,QVHUWDÀDWKHDGVFUHZGULYHULQWR
either of the gaps ( ) between
the cover and tabletop. Pry to
remove the cover.
【3】
Mounting.
(For recessed mounted models)
【4】
Push the cover in until a
c li c k s o un d i s h e ar d,
Leave no gap between
the cover and table top.
Provided screws
Metal mounted: (screws not included)
refer to the Screw section on page 1.
USB jack
(sold separately)
LAN jack
(sold separately)
Enclosed tyoe cable case
(sold separately)
This product
Cover
(sold separately)
DMF3
DMFH3
HDMI jack
(sold separately)
Lip