Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure
correct installation. Please keep this manual at hand for future reference.
Description
Quantity
Flap lid body
1
Warning sticker
1
Cover caps
4
Installation procedure
Make sure that the LAMP logo is at the top.
Stick the edge tape around
the hole.
〈1〉
Fix the unit with six screws.
〈2〉
0DNHVXUHWKDWWKHÀQDODVVHPEO\LV
securely fastened.
Slowly open and close the lid completely a few
times in order to make sure that there are no
obstacles such as the bottom edge of the cutout
or any item inside.
Cover the holes with the cover caps provided.
Dimension drawing
●
Edge tape
●
Screws (not provided)
Choose the suitable length according to the material to be mounted.
Recommended screw : Tapping screw Nominal 4
・・・・・・
6 pcs
Cutout dimensions
About the product
Damper allows silent closing of lid.
Side plates for anti-pinch function.
Paste the warning sticker in a visible position
to avoid any injury when using the AZ-GD231.
1
2
3
4
5
6
Tools needed for assembly
CAUTION
If these cautions are not followed, it may result in injury or damage.
The AZ-GD231 is designed to function when installed vertically as shown below. Horizontal, slanted or
upside down installation will result in improper function and may lead to injury.
To avoid any risk of accidental fall and injury, ensure that the AZ-GD231 is securely fastened to
the place
which has adequate strength.
Any attempt to dismantle, modify or use in any way other than that indicated below, may result in damage or
injury.
Recommended ambient temperature range is 0 to 40 degrees centigrade.
The closing speed of the lid may change due to ambient temperature .If the product is stored below zero
degree, please use it after several hours of storage in normal room temperature.
This symbol denotes prohibited actions.
This symbol denotes what must be done.
AZ-GD231 STAINLESS STEEL SOFT CLOSING FLAP LID SYSTEM
Installation instructions
Parts description
For your safety work and operation
LAMP
logo
TOP
BOTTOM
Lid
Cover caps
Holes
Cut out : Backside view
308
234
160
234
278
102
102
198
1.5
100
230
198
24
102
156
16
24
278
102
6×φ5holes
（
for fixing
）
Mount
ing screw holes
4×R6 Max
0
-1
0
-1
(22.6)
when flap at 90˚
(184.7)
when flap at 90
˚
(249) when flap at 90˚
Edge tape
(not provided)
Screws
（
not provided
）
Tapping screw Nominal 4
is recommended.