LaMotte TRACER POCKETESTER TDS/SALT/TEMP, Инструкция по эксплуатации

Страница: 15 / 20

MAINTENANCE
Care/Storage of Electrode
1.
Always rinse the electrode in distilled, tap or deionized water
between measurements to avoid cross-contamination of the samples.
Double rinsing is recommended when high accuracy is required.
2.
Store the electrode dry with the cap on.
3.
Do not touch the electrodes. Touching the surface of the platinized
electrodes may damage and reduce the life of the electrodes.
Electrode Cleaning Recommendations
Do not soak the electrode in the solutions for longer than the
recommended length of time. To do so may cause a reference
potential shift which will cause a degradation in performance or
failure. When cleaning the probe, do not scratch or damage the
platinized electrode surfaces. To remove water soluble contaminants
from the electrode, soak the electrode in deionized water and scrub
with a soft brush.
Battery Replacement
1.
Twist off the battery compartment cap.
2.
Hold the battery housing in place with one finger. Remove the
battery carrier by pulling on the small tabs.
3.
Replace the four CR2032 batteries. Observe polarity.
4.
Replace the battery compartment cap.
15