E
Lower gasket
1
F
Rubber horseshoe
1
G
Metal horseshoe
1
H
Fixing nut
1
I
Hot water flexible tail pipe
1
J
Cold water flexible tail pipe
1
After installation:
Once you have visually checked the installation of the new tap and all connections, ensure that all other fittings are
closed except the new tap which should be left open.
Turn on your water heating system and ensure that your mains stopcock is open. Reconnect both the hot and cold
water supplies to this fitting.
Check the function of flow and function of hot, cold and mixed water.
Turn off the tap and check carefully for any leaks around all connections on the fitting and adjoining plumbing.
If possible return to the installation after a longer period to double check for slower leaks. If pressure testing
equipment is available check the installation to the maximum recommended pressure.
Clean the tap to remove any marks created during installation as instructed then place a bag over the product to
protect the tap until it is ready for use.
The installation should be periodically checked for damage, if the property is left unattended for a prolonged period
we recommend isolating water supplies.
⚠
Correct use of flexible hose connectors
This product is supplied with flexible hose connections for ease of fitting, failure to observe these
standard installation guidelines will invalidate the warranty for your product.
•
Before assembling the hose to the
product ensure the hose has been
crimped (as highlighted) on both
ends of the hose after the braided
casing.
•
Always screw the flexi hoses into
the product only by hand until
feeling mechanical rest, a spanner
must not be used on the product
connecting end of the hose.
•
Always use the pipes provided.
•
Never twist or stretch the flexible
hose during installation.
•
Do not overtighten the hexagonal
end of the hose when using a
spanner causing the hose to twist.
