Lamona TAP9160 Скачать руководство пользователя страница 1

Guarantee (UK only): 

 
Your tap has the benefit of a comprehensive manufacturer’s guarantee, details of which are shown on your Proof 
of Purchase Document. Any claim during the period of the guarantee must be accompanied by the Proof of 
Purchase. The product must be correctly installed and operated in accordance with the manufacturer’s instructions 
and used for normal domestic purposes. This guarantee does not cover accidental damage, misuse or alterations 
which are likely to affect the product. The guarantee is invalid if the product is tampered with, or repaired by any 
unauthorised person. The guarantee in no way affects your statutory or legal rights. 

 

Care Instructions for your Kitchen Sink Mixer: 

 

To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A 
solution of warm water and a mild liquid detergent may be used where necessary, and then the fitting rinsed 
thoroughly and wiped dry. Any other cleaning action will invalidate your warranty.  
 
Abrasive cleaners, scouring cleaners and acidic cleaners 

must not be used 

under any circumstances. Avoid 

contact with all solvents (including chlorinated solvents, ketones or acetones as these may result in surface 
deterioration or etching). Also avoid contact with any harsh household chemicals such as oven cleaners, drain 
cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend or Brasso. 
 
Where the tap has a removable aerator on the spout exit it can be removed and cleaned periodically to maintain 
optimum flow performance. 

 

Important Technical Data: 

 

Minimum operating pressure: 1.0 bar 

 

Maximum hot water temperature:  70°C* 

 

Maximum operating pressure: 5.5 bar* 

 

Recommended hot water temperature:  46°C 

Flow characteristics: Single flow 

 

 

 

*If these temperatures or pressures are exceeded, even for short periods, damage can result. In these instances a 
thermostatic mixing or pressure reducing valve should be installed. 
 
This product is either manufactured in accordance with recognised European standards. Please ensure that your 
Kitchen mixer is fitted in accordance with Local Water Byelaws. Where hot and cold water mix within the mixertap, 
then suitable non return (check) valves should be installed to the hot and cold supplies to prevent backflow. 
 
Hot and cold supply pressures should be as closely balanced as possible for best results. Supply pipes should 
maintain the maximum diameter until immediately before the fitting. The differential between the hot and cold water 
supply temperatures should be sufficient to allow correct mixing function. 
 
These installation guidelines have been prepared for your direction and you must exercise due care at all times. 
We do not accept responsibility for problems that may occur through improper installation. Whilst assembling the 
tap take care not to accidentally loosen any factory fixed assemblies. 
 
This tap has been 100% assembly tested; therefore you may expect a small residual amount of water to remain in 
the tap when delivered. Any water marks can be removed using the above care advice. 

 

 
 
 

 

TAP9160, TAP8320-v3

 

 
 
 

Installation Preparation: 

 

Calcinara Tap 
 
TAP9160, TAP8320

 

 

07-21

 

Содержание TAP9160

Страница 1: ...t exit it can be removed and cleaned periodically to maintain optimum flow performance Important Technical Data Minimum operating pressure 1 0 bar Maximum hot water temperature 70 C Maximum operating pressure 5 5 bar Recommended hot water temperature 46 C Flow characteristics Single flow If these temperatures or pressures are exceeded even for short periods damage can result In these instances a t...

Страница 2: ...g surface available and reach the required outlet positions before installation Loosely position the tap and tail pipes to check if any alteration to the existing pipework is required if this is the case do this now Installation 1 Screw in the fixing stud D into the base of the tap A 2 Place the base plinth B then upper seal C over the fixing stud D to the base of the tap body A 3 Screw the hot an...

Страница 3: ...mmended pressure Clean the tap to remove any marks created during installation as instructed then place a bag over the product to protect the tap until it is ready for use The installation should be periodically checked for damage if the property is left unattended for a prolonged period we recommend isolating water supplies Correct use of flexible hose connectors This product is supplied with fle...

Страница 4: ...chemicals internal or external room walls or dissimilar metals or materials Observe the minimum bend radius of 50mm hoses must not be kinked or looped Hoses must not be double bent in multiple directions Both ends of the hose must have a minimum 50mm straight section before any bend 50mmØ ...

Отзывы: